Laurel Machine Co.
119 Commerce Drive
PO Box 133
Mt. Braddock, PA   15465
Tel:  724-438-8661 or Fax: 724-439-9635
                                                                                                                                     

Go To Home
 
Go To View LMC
 
Go To Fabrication
 
Go To Manual Machining
 
Go To CNC Machining
 
Go To Company Information
 
Go To Feedback
 
Go To About LMC
 
Go To BJ
 
Go To Abby
 
Go To Gabrielle

DAEWOO PUMA 300 MSB MILL/DRILL  TURNING CENTER W/ SUB-SPINDLE

 

 

SPECIFICATIONS

 

CAPACITY: 

  • Swing over bed_________________________23.2”

  • Swing over carriage_____________________17.7”

 

MAIN SPINDLE:

  • Spindle speed____________________________35 – 3,500 RPM

  • Draw tube I.D. ___________________________3.03”

  • AC high torque spindle motor (30 min.)________30HP

       

C-AXIS:

  •  Minimum programmable angle (degrees)_______________.001

        

BED, SADDLE, & CROSS SLIDE:

  • X axis travel___________________________________9.8”

  • Z axis travel__________________________________26.8”

  • B axis travel (sub-spindle)______________________26.8”

  • X axis repeatability____________________________+/- 0.00006”

  • Z axis repeatability____________________________+/- 0.00008”

 

TURRET:
  • Number of tools___________________________________12

 

ROTATING TOOLS:
  •  Rotating tool RPM______________________________40 – 4,000 RPM
  •  Rotating tool spindle motor________________________5 Hp

 

SUB-SPINDLE:
  •  Spindle speed___________________________________45 – 4,500
  • Spindle motor ___________________________________10 HP

[ Cadet LNC-8 ] [ VR 40 3 Axis ] [ CNC 8 Cadet ] [ LB 25 Lathe ] [ MC60 VAE CNC ] [ Daewoo Puma 400L ] [ OKK VM5 ] [ Daewoo ACE-H100 ] [ Daewoo Puma300MS ] [ Daewoo Puma 230MS ] [ Kasto Twin A4 ] [ Daewoo Puma 400C Lathe ] [ Daewoo 3016L Machine Center ]

This Web Site Designed by
 Whitacre Computer Services  .